The ELTRA CS-800 with induction furnace is ideally suited for the simultaneous determination of carbon and sulfur in inorganic samples. It provides quick and precise analysis results and can be used for a variety of applications.
The carbon / sulfur analyzer CS-800 is equipped with up to four independent infrared (IR) cells which allow for precise simultaneous analysis of high and low carbon and sulfur concentrations in one measurement. The sensitivity of the cells can be customized individually by selecting the length of the IR path to ensure the optimum measuring properties for each application.
alloys, carbides, cast iron, cement, ceramics, copper, glass, iron, minerals, ores, refractory metals, sand, steel, titanium, waste
|Measured elements||carbon, sulfur|
|Sample carrier||ceramic crucibles|
|Field of application||construction materials, engineering / electronics, geology / mining, glass / ceramics, steel / metallurgy|
|Furnace||induction furnace, above 2,000 °C|
|Detection method||solid state infrared absorption|
|Number of IR cells||1 - 4|
|Material of IR path||aluminum (optional gold)|
|Typical analysis time||40 - 50 s|
|Chemicals required||copper oxide, magnesium perchlorate, sodium hydroxide|
|Gas required||compressed air (4 - 6 bar/ 60 - 90 psi) |
oxygen 99.5 % pure (2 - 4 bar / 30 - 60 psi)
|Power requirements||230 V, 50/60 Hz, max. 15 A, 3450 W|
|Dimensions (W x H x D)||55 x 80 x 60 cm|
|Weight||~ 110 kg|
|Required equipment||balance (resolution 0.0001g), monitor, PC|
|Optional accessories||Autoloader (for 36 or 130 crucibles), carrier gas purification, halogen trap, HTF-540 pre-heating furnace, voltage stabilizer 5 KVA|
Carbon / Sulfur Analyzer CS-800: Operation
Operating the CS-800 is simple and safe. After weighing the sample in a ceramic crucible, the weight is transferred from the interfaced balance to the PC. If required, sample weights can also be entered manually. Then an accelerator (such as iron or tungsten) is added and, after having placed the crucible on the pedestal, the analysis starts. The analysis time is 40 to 50 seconds. The detector signals and instrument parameters are displayed during analysis. Evaluation of the signals and display of the results are done automatically; the data can be transferred to a laboratory information management system (LIMS). The CS-800 requires minimum maintenance. The particle filters and chemicals which need to be maintained are easily accessible.
Carbon / Sulfur Analyzer CS-800: Measuring Principle
In the induction furnace the sample is melted in a pure oxygen atmosphere, causing sulfur to react to sulfur dioxide (SO2) and carbon to a mixture of carbon monoxide (CO) and carbon dioxide (CO2). The combustion gases pass through a dust filter and moisture absorber for purification. In the next step the sulfur dioxide is detected in infrared cells. In the CS-800 infrared cells with different sensitivities (high/low) can be adapted according to the userâ€™s requirements. Oxidation of both, carbon monoxide to carbon dioxide and sulfur dioxide to sulfur trioxide follow the sulfur measurement. The SO3 gas is removed with cellulose wool; the carbon content is detected by infrared cells which can be individually customized. The ELTRA CS-800 analyzer can be equipped with up to 4 independent infrared cells.
Subject to technical modifications and errors